ya2000-b

this product is suitable for used in home, storehouse, bank, office and commecial buildinds
main functions of the intelligent guard area alarm system
spot alarm:there will be big sound to threat the thieves if anything unusual happened.
long-distance sending message: when something unusual happends, the four telephone numbers that you have set up previously will be dialed automatically by the system, then the system will go on telling the exact place to someone concerned.
automatically having the priority: whether the exterior telephone is used or not, the internal micro processor of the system has the priority to send the information automatically quickly and precisely.
long-distance control: you can use the mobile phone or home telephone to control the host which has a lot of functions, including the long-distance function locking, and the alarm set-up or canceling functions’ on or off, and alarm mode function selecting, and the alarm setting up or canceling operation.
two alarm modes selecting:you can choose call the guards with spot alarm or soundless alarm.
there are two alarm modes for you to select: spot alarm & alarm by telephone, soundless alarm.
function scheme freely: you can install any wire or wireless sensors including the infrared body explorer, light explorer, glass fracture explorer, shaking sensor freely to satisfy your needs. and the alarm speakers have no source speaker and the source speaker.
keyboard lock: there is a key board lock in it. at any time you want to operate the key of the host you must put into the right password with two numbers to recognize the id.
short-distance operation: you can use the external telephone to operate the host with the functions of the long-distance function locked or unlocked, and the alarm set-up or cancelled functions’ open or close, and alarm mode selecting, so long as the host is still on the normal working state.
long-distance alarm cancelling: after you received the telephone alarming and the information from it, you can press the key “#” under the soundless state if you think it necessarily to cancel the alarm, and at the same time the alarm will come back to the alarm set-up state. it will be going on alarming when it was touched again.
record and play sounds function:the host enjoys ten seconds’record and play sounds function to leave message.
sound record function: there is ten seconds’ leave massage that is recorded to inform the alarm message in the host.
built-in rechargeable stored battery:the stored battery with full of energy can continually work 24 hours when power cut.
menory function:there is built-in memory chip in the host to memorize the phone number without losing when power cut.
remind function:when the phone number kept in the host had been deleted or lost for something unusual happened,the touch-off and emergency alarm will remind only once.
remind without phone number function:…….the siren just calls only once to remind to enter the phone number under touch-off and emergecy.
someone at home alarm setting:the guard area host equiped with four keys remote control which is used for setting-up when someone at home.after pressing this key,the alarm will come into the alarm set-up state without any delay.
monitor funtion:after receiving the alarm telephone,you can turn on the moniter function to listen in the spot situation.
couple within small section: if you have set up the telephone of the security room, it will turn it on with priority when something unusual happens and send it to every guards’ interphone concerned automatically through translator, so as to have a quick response.